Nylon Membrane Capsule Filter

Item #: 14702XX Series
Manufacturer: SterliTech

Product Description

Sterlitech Nylon Capsule Filters may be sanitized with a variety of commonly used chemical agents; however, acidic solutions should be avoided.  The capsules may be repeatedly autoclaved (121°C 30 min) for up to 5 cycles.

The materials contained in the Nylon Capsule filters meet U.S. FDA requirements for food contact under the applicable regulartions in 21 CFR. 

Sterlitech filter capsules are designed and manufactured for resistance to a wide range of chemical solutions.  Conditions will vary with each application and users should carefully verify chemical compatibility. 

Nylon Capsule Filters have a unique polyester and polypropylene construction for enhanced reliability and usefulness.


Nylon Capsule Filter Applications:

Solvents, Fine Chemicals, Ink Jets, Process Water, Beverages, Cosmetics, Parts Cleaning, Electronics, Pharaceuticals, Biologics, Dyes, Lacquers


 Membrane Naturally Hydrophilic Nylon 6
 Membrane Supports Polyester Microfiber
 Housing Polyester
 Cage, Core, End Caps Polypropylene
 End Fittings Available 1/4" Barb, 1.5" Sanitary Flange, 1/2" NPTM, 1/4" Barb, 1/4" NPTM, 3/8" Barb
 Lengths Available Varies with connection style
 Diameter 9 cm (3.5 in)
 Max Operational Pressure 5.5 bar (80 psi) @ 21°C (70°F) in Liquid, 3.8 bar (55 psi) @ 21°C (70°F)
 Max Differential Pressure 4.1 bar (60 psi) @ 21°C (70°F)
 Max Operating Temperature 43°C (110°F) at 2.1 bar (30 psi)
 Autoclave Up to 5 Cycles. 30 minutes @ 121°C
 Flow Rate, Small <1.9 L/min (0.5 gal/min)
 Flow Rate, Medium <7.5 L/min (2 gal/min) 
 Flow Rate, Large <15 L/min (4 gal/min)