Microprocessor controls maintain humidity and temperature in approximate ranges of 40%-95% and 40°C-70°C respectively. A low-pressure water vapor generator controls chamber humidification by injecting saturated water vapor into the recirculating air duct which is preferable to steam generation because steam introduces additional heat to the chamber atmosphere. This can compromise temperature control. NextDayScience's Humidity Test Chambers provide a controlled environment for a wide range of industrial and biotechnical testing applications. 

All chambers include:

• Microprocessor Control
• Seamless Corrosion-Resistant Stainless Steel Interior
• High Limit Back-Up Controller
• 220V units are available as well.

Capacity	9.0 cu.ft.
Interior Dimensions WxDxH (cm)	30 x 20 x 30 (76.2 x 50.8 x 76.2)
Exterior Dimensions WxDxH (cm)	44 x 29 x 60 (111.76 x 73.66 x 152.4)
Temperature Uniformity	+/-0.5° at 37°C
Volts	120V
Hertz	50/60 Hz
Watts	1400W
Amps	11.7A
Jacket Type	Air
Relative Humidity Range	Ambient +10%, -95%
Shelving	3 Supplied (8 Maximum)